89467-33040 Auto Oxygen Sensor Air Fuel Ratio Sensor For Toyota Camry Solara Avensis Previa RAV4

The 89467-33040 air-fuel ratio (A/F) sensor is the upstream regulating probe used on Toyota 1AZ-FE / 2AZ-FE petrol engines across the Camry, Solara, Avensis Verso, Picnic, Previa and RAV4 II ranges. It is a direct-fit replacement for the Denso 192400-0090 application.

Unlike a conventional narrow-band oxygen sensor, the A/F sensor measures the exact oxygen content of the exhaust gas and returns a linear signal to the ECU, so the stoichiometric air-fuel ratio can be held precisely under all driving conditions.

The integrated heater brings the planar ceramic element to operating temperature within seconds of a cold start, allowing the ECU to enter closed-loop control earlier and reducing cold-start emissions. The sensor features a stainless-steel shell, a planar zirconia ceramic element, and a laser-welded protection tube against contamination and thermal shock.

• Four wires, two circuits: two wires feed the internal heater; two carry the A/F sensor signal. The sensor outputs a linear current signal rather than a switching voltage.
• Regulating probe: fitted before the catalytic converter as the ECU's primary fuel-control input; it is not interchangeable with the post-catalyst oxygen sensor.
• Direct-fit: rectangular 4-pin plug and pre-terminated 510 mm cable — no cutting or splicing required.
• Installation position: confirm against the original sensor position on your vehicle. Always compare connector shape, pin count, cable length and thread before ordering.
• Torque: tighten to the vehicle manufacturer's specification (typically 40–55 N·m on an M18 x 1.5 boss). Do not use silicone-based sealant anywhere near the sensor.